高级检索

    葛秋芬, 隋淑英, 刘杰, 朱平, 董朝红, 张林. 纤维素-热塑性聚氨酯共混膜的制备及性能[J]. 功能高分子学报, 2015, 28(2).
    引用本文: 葛秋芬, 隋淑英, 刘杰, 朱平, 董朝红, 张林. 纤维素-热塑性聚氨酯共混膜的制备及性能[J]. 功能高分子学报, 2015, 28(2).
    shu
    GE Qiu-fen, SUI Shu-ying, LIU Jie, ZHU Ping, DONG Chao-hong, ZHANG Lin. Preparation and Properties of Cellulose-Thermoplastic Polyurethane Blend Films[J]. Journal of Functional Polymers, 2015, 28(2).
    Citation: GE Qiu-fen, SUI Shu-ying, LIU Jie, ZHU Ping, DONG Chao-hong, ZHANG Lin. Preparation and Properties of Cellulose-Thermoplastic Polyurethane Blend Films[J]. Journal of Functional Polymers, 2015, 28(2).
    shu

    纤维素-热塑性聚氨酯共混膜的制备及性能

    Preparation and Properties of Cellulose-Thermoplastic Polyurethane Blend Films

      摘要
    • 摘要: 利用乙二胺活化纤维素，将活化后的纤维素（Ce）和热塑性聚氨酯（TPU）分别溶于氯化锂（LiCl）-N,N-二甲基乙酰胺（DMAC）体系，制得纤维素-热塑性聚氨酯（Ce-TPU）共混膜。利用傅里叶红外光谱仪（FT-IR）、扫描电子显微镜（SEM）、X射线衍射仪（XRD）、单纤强力仪、折痕恢复性测定仪对共混膜的结构和性能进行表征。结果表明：Ce和TPU相容性良好，w(TPU)=30%时为共混膜的最优配比，此时断裂强力较纯纤维素膜略有提高，断裂伸长率提高了68%，折皱回复角提高了17%，共混膜的抗皱性和弹性有所改善。

       

      Abstract: The cellulose (Ce) was activated by ethylenediamine, and the blend films (Ce-TPU) were prepared by using the activated cellulose as material, solution casting lithium chloride(LiCl)-N,N-dimethylacetamide(DMAC) as solvent system and thermoplastic polyurethane(TPU) as finish agent. Structure and properties of the blend films were investigated by Fourier Infrared spectroscopic analysis (FT-IR), X-Ray Diffraction (XRD), tensile strength test and crease recovery test, respectively. Results demonstrated that the compatibility of cellulose and TPU was good. The optimization ratio of blend films was 30% of TPU mass fraction. For the optimal blend films, the breaking force was slightly enhanced, while the elongation at break was improved by 68%, and the crease recovery angle increased by 17%, the wrinkle resistance and elasticity were better than those of pure cellulose films.

       

      • HTML全文
      • 参考文献(0)
      • 相关文章
      • 施引文献
    • 资源附件(0)

    /

    返回文章
    返回