高级检索

    倪秋如1, 倪礼忠1, 夏宏伟2, 冯伟祖2, 黄增琦2, 周权1. TBPB-TBPO引发不饱和聚酯树脂固化的动力学[J]. 功能高分子学报, 2014, 27(3).
    引用本文: 倪秋如1, 倪礼忠1, 夏宏伟2, 冯伟祖2, 黄增琦2, 周权1. TBPB-TBPO引发不饱和聚酯树脂固化的动力学[J]. 功能高分子学报, 2014, 27(3).
    shu
    NI Qiu ru1, NI Li zhong1, XIA Hong wei2, FENG Wei zu2, HUANG Zeng qi2, ZHOU Quan1. Kinetic of Unsaturated Polyester Resin with TBPB-TBPO[J]. Journal of Functional Polymers, 2014, 27(3).
    Citation: NI Qiu ru1, NI Li zhong1, XIA Hong wei2, FENG Wei zu2, HUANG Zeng qi2, ZHOU Quan1. Kinetic of Unsaturated Polyester Resin with TBPB-TBPO[J]. Journal of Functional Polymers, 2014, 27(3).
    shu

    TBPB-TBPO引发不饱和聚酯树脂固化的动力学

    Kinetic of Unsaturated Polyester Resin with TBPB-TBPO

      摘要
    • 摘要: 采用差示扫描量热法(DSC)对不饱和聚酯(UP)树脂复配引发体系进行固化动力学研究，复配引发剂为过氧化苯甲酸叔丁酯(TBPB) 过氧化辛酸酯(TBPO)。采用高斯(Gaussian)分峰法对DSC曲线上的固化放热峰进行双峰拟合，并通过Ozawa方程对拟合结果进行固化动力学参数分析。研究表明：Gaussian双峰拟合后得到的结果与实验数据非常吻合，固化动力学参数更贴近实际固化过程。

       

      Abstract: The curing behavior of unsaturated polyester resin with complex initiation system TBPB-TBPO was studied by DSC. Gaussian model was used to fit two peaks, and curing kinetic analysis was made by Ozawa method. Results showed that fitting peaks were quite fit to experiment data and kinetic parameters calculated by fitting peaks divided by Gaussian model were close to the experiment data.

       

      • HTML全文
      • 参考文献(0)
      • 相关文章
      • 施引文献
    • 资源附件(0)

    /

    返回文章
    返回