高级检索

    王红权, 续文恒, 张朔, 姜翔宇, 李慧, 陈家琛, 蔡春华, 林嘉平. 聚肽HVLPs的制备与载药性能[J]. 功能高分子学报, 2020, 33(3): 245-252. doi: 10.14133/j.cnki.1008-9357.20190424001
    引用本文: 王红权, 续文恒, 张朔, 姜翔宇, 李慧, 陈家琛, 蔡春华, 林嘉平. 聚肽HVLPs的制备与载药性能[J]. 功能高分子学报, 2020, 33(3): 245-252. doi: 10.14133/j.cnki.1008-9357.20190424001
    WANG Hongquan, XU Wenheng, ZHANG Shuo, JIANG Xiangyu, LI Hui, CHEN Jiachen, CAI Chunhua, LIN Jiaping. Polypeptide-Based Hollow Virus-Like Particles: Preparation and Drug-Loading Property[J]. Journal of Functional Polymers, 2020, 33(3): 245-252. doi: 10.14133/j.cnki.1008-9357.20190424001
    Citation: WANG Hongquan, XU Wenheng, ZHANG Shuo, JIANG Xiangyu, LI Hui, CHEN Jiachen, CAI Chunhua, LIN Jiaping. Polypeptide-Based Hollow Virus-Like Particles: Preparation and Drug-Loading Property[J]. Journal of Functional Polymers, 2020, 33(3): 245-252. doi: 10.14133/j.cnki.1008-9357.20190424001

    聚肽HVLPs的制备与载药性能

    Polypeptide-Based Hollow Virus-Like Particles: Preparation and Drug-Loading Property

    • 摘要: 通过脱苄基和酯化反应,在聚(γ-苄基L-谷氨酸酯)-b-聚乙二醇(PBLG-b-PEG)嵌段共聚物的PBLG嵌段侧基修饰上可光交联的肉桂酰氧基,得到聚(γ-苄基L-谷氨酸酯-co-肉桂基L-谷氨酸酯)-b-聚乙二醇(P(BLG/CLG)-b-PEG)嵌段共聚物。将P(BLG/CLG)-b-PEG分别与PBLG均聚物、聚苯乙烯(PS)均聚物共混自组装,制备出具有核-壳结构的棒状和球状仿病毒粒子(VLPs),其中,均聚物形成棒状或球状内核,嵌段共聚物构成外壳。利用紫外光照射交联CLG链段固定VLPs壳结构,以N,N′-二甲基甲酰胺(DMF)溶解去除均聚物内核,制备中空仿病毒粒子(HVLPs)。采用扫描电镜、透射电镜表征了组装体的微观形貌。研究表明:DMF可以溶解去除球状VLPs的PS均聚物内核,制备出表面具有条纹的球状HVLPs;而棒状VLPs的PBLG均聚物内核不能被DMF溶解去除。以阿霉素(DOX)为模型药物,研究了球状HVLPs的载药性能,其对DOX的相对载药量可以达到230%,在pH = 7.4时72 h药物累计释放量达到80%。

       

      Abstract: Virus-like particles (VLPs) have attracted increasing attentions in the field of drug-delivery.The ordered surface nanostructure is one of the essential structures of the natural virus. The preparation and drug-loading property of polypeptide-based hollow VLPs with ordered surface nanostructures were investigated. Starting from poly(γ-benzyl-L-glutamate)-block-poly(ethylene glycol) (PBLG-b-PEG) block copolymers, through deprotection of the benzyl group and subsequent esterification reaction, poly(γ-benzyl-L-glutamate-co-γ-cinnamyl-L-glutamate) -block-poly(ethylene glycol) (P(BLG/CLG)-b-PEG) block copolymers were synthesized, in which the cinnamyl group was photo-cross-linkable. The photo-cross-linking process of the P(BLG/CLG)-b-PEG block copolymers was tracked by the UV-Vis spectrum. Adding water to the solution of P(BLG/CLG)-b-PEG block copolymer and PS homopolymers in THF-DMF mixture (volume ratio 1/1), spherical VLPs were self-assembled from the polymer mixtures. These VLPs contained a PS homopolymer core and P(BLG/CLG)-b-PEG block copolymer shell, and the P(BLG/CLG)-b-PEG block copolymers packed orderly forming strips on the surface. When replacing the PS homopolymers by rigid PBLG homopolymers, rod-like VLPs were obtained in which the PBLG homopolymers formed bundles and P(BLG/CLG)-b-PEG block copolymers self-assembled on the surface of the PBLG homopolymer bundles into helical nanostructures. Under UV-irradiation at λ = 254 nm, the P(BLG/CLG) blocks in the shell of both the spherical and the rod-like VLPs were cross-linked through the photodimerization of the cinnamyloxy groups. To the solution of the shell-crosslinked spherical VLPs, adding a large amount of DMF could remove the PS core-forming hollow virus-like particles (HVLPs), and the strip patterns on the surface were retained. However, for the rod-like VLPs, under similar conditions, the PBLG homopolymers in the core could not be removed. The drug-loading capacity of the spherical HVLPs was evaluated by using doxorubicin (DOX) as a model drug. It was found that DOX was successfully loaded into the HVLPs with a high relative drug-loading mass fraction (230%). Releasing studies revealed that the drugs could gradually release from the VLPs, and 72 h accumulate releasing mass fraction reached about 80%. This work provides a method to prepare polypeptide-based HVLPs with surface nanostructures, and these HVLPs could find applications for drug delivery.

       

    /

    返回文章
    返回